Waterloo F1881 Manual de usuario descargar pdf (Pagina 4)

Process:

• Attach (2) Side Support Rail, as shown, using (2) M8-

1.25 x 16mm Carriage Bolt, (2) M8 Washer, and (2)

M8-1.25 Hex Lock Nut in each Side Support Rail.

• Finger tighten.

SIDE SUPPORT INSTALLATION

Items Needed:

Side Support Rail (Qty: 2)

M8-1.25 x 16mm Carriage Bolt (Qty: 4)

M8 Washer (Qty: 4)

M8-1.25 Hex Lock Nut (Qty: 4)

Process:

• Place Locking Top and Drawer Unit on its back on

packaging material as shown.

• Attach assembly from steps 1 through 4, using (12) M8-

1.25 x 16mm Carriage Bolt, (12) M8 Washer, and (12)

M8-1.25 Hex Lock Nut.

• The notches should be on the side with the label. Leave

holes in notches open for later assembly.

• Finger tighten.

TOP AND DRAWER UNIT ASSEMBLY

Items Needed:

Locking Top and Drawer Unit (Qty: 1)

M8-1.25 x 16mm Carriage Bolt (Qty: 12)

M8 Washer (Qty: 12)

M8-1.25 Hex Lock Nut (Qty: 12)

Process:

• Attach Handle to bottom set of holes using (2) M8-1.25

x 16mm Carriage Bolt, (2) M8 Washer, and (2) M8-1.25

Hex Lock Nut.

• Install (2) M8-1.25 x 16mm Carriage Bolt (In a Separate

Bag) in top set of holes using (2) M8 Washer and (2) /16-

18 Hex Lock Nut.

• Finger tighten.

HANDLE INSTALLATION

Items Needed:

Handle (Qty: 1)

M8-1.25 x 16mm Carriage Bolt (Qty: 2)

M8 Washer (Qty: 4)

M8-1.25 Hex Lock Nut (Qty: 4)

M8-1.25 x 16mm Carriage Bolt (Qty: 2) (In Separate Bag)

Notch

Label

Leave open for

later assembly

Packaging

material

Packaging

material

Hinge

Side Support Rail

Flange

on top

Nut

Bolt

Carriage Bolts

(In a separate bag)

Carriage Bolts

1 2 3 4 5 6 7 8 9 ... 23 24

Comentarios a estos manuales

Sin comentarios

Waterloo F1881 Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Waterloo F1881